Product categories

Current sensor SCT 20A for LAN controller v3

330 CZK 273 CZK without VAT

After order for 3 weeks

Code: NJSGWL0051 PN: LANKON-202 Warranty: 26 months
Tinycontrol AC Current Clamp Sensor - 20 A This non-invasive current sensor clamped around the supply line can measure a load up to 20 Amps, and allow you to calculate how much current pass through it. It can be useful for... more
Tinycontrol AC Current Clamp Sensor - 20 A

This non-invasive current sensor clamped around the supply line can measure a load up to 20 Amps, and allow you to calculate how much current pass through it. It can be useful for building your own energy monitor or for building an over-current protection device for an AC load. This current clamp can be used to detect a current of up to 20 A. Simply clip it around the current source that you wish to measure and it will produce a (very) small AC voltage proportional to the current. The cable is terminated on one end with a standard 3.5 mm jack (like a headphone jack). Use this to build your own energy monitor and keep your power usage down, or use it to to build an over-current protection device for an AC load.

Specifications

Input Current: 0-20 A
Maximum diameter of measured conductor: 12 mm
Output Mode: 0-1 V (AC)
Output Plug: 3.5 mm
Cable Length: 1 m
Weight: 45 g


The method of connecting the sensor to the LAN driver v3 can be found in the manual [CZ].

Brand
Manufacturer :  TINYCONTROL
Type specification :  Network specialties
Technical specification
Max. operating temperature (°C) :  70
Min. operating temperature (°C) :  -25
Warranty
Warranty period CRN (months) :  26
Warranty period EU (months) :  26
Physical properties
Dimensions :  57 × 32 × 21 mm
Weight (g) :  45
Hodnocení můžou přidávat pouze přihlášení uživatelé a ti kteří produkt zakoupili

Similar products

Scroll