Product categories

MikroTik netFiber 9, 4x SFP+, 5x SFP, 1x Gbit LAN PoE in, L5

Akce
5 451 CZK 4 505 CZK without VAT

To send: 2 pcs

Code: NABMKR1175 PN: CRS310-1G-5S-4S+OUT Warranty: 26 months
MikroTik netFiber 9 (CRS310-1G-5S-4S+OUT) A remarkable outdoor switch for setting up an optical 10G network that can even perform some light routing. The spiritual successor to the beloved FiberBox. Gigabit Ethernet, SFP... more
MikroTik netFiber 9 (CRS310-1G-5S-4S+OUT)

A remarkable outdoor switch for setting up an optical 10G network that can even perform some light routing. The spiritual successor to the beloved FiberBox. Gigabit Ethernet, SFP/SFP+, PoE.

netFiber 9 is a powerful outdoor switch with SFP, SFP+, and Gigabit Ethernet. It features a powerful ARM v7 CPU, 256 MB of RAM, 4x 10G SFP+ ports, and an advanced Marvell switch-chip that can handle even the heaviest loads. The Gigabit Ethernet port is not just for management purposes. It has a direct connection to the switch chip – so you can enjoy full gigabit speed. This port also supports PoE-in, so you don’t have to rely on the DC jack for powering in tight, hard- to-reach spots.

There is a console port, followed by five regular SFP ports and four SFP+ ports for that sweet 10 Gbps networking. This means there might be quite a lot of wires for you to organize at some point. That’s why we designed the case to have some handy little additional features on the bottom of the case to help you keep everything neat and tidy.

The sturdy case provides decent protection in dusty environments with occasional splashes of water. Perfect for outdoors with some light coverage – like a roof overhang or a simple cabinet. There is a massive heatsink on the back that serves two purposes. Not only it provides outstanding heat dissipation, it also moves the center of mass towards the side with all the mounting options – keeping the board firm and strong upon installation. The package includes metal hose clamps and screws, so you can attach the netFiber to a pole, wall, or mast right away.

netFiber 9 is an amazing tool for anyone working with connections over 100 meters while keeping data loss and ping low. Optic fiber can be a great alternative to copper if you are worried about electromagnetic interference or maybe even tampering and eavesdropping. With 10 ports, a powerful CPU, and a rugged case, netFiber 9 is a real bargain that will make your network management so much easier!

SPECIFICATIONS

CPU: Marvell ARM v7 32bit, 98DX226S, 800 MHz
Ports: 4x 10G SFP+, 5x 1G SFP, 1x GbE RJ-45, 1x console port (RJ-45)
Operating system: MikroTik RouterOS (L5)
PoE support: yes, 1x PoE-in (802.3af/at)
Power: DC 18-57 V or PoE/PoE+ (DC 18-57 V)
Dimensions: 303 x 212 x 71 mm



Brand
Manufacturer :  MIKROTIK
Type specification :  Switch
Technical specification
Outdoor use :  yes
Placement :  pole
Placement :  wall
Management :  yes
Ingress protection :  IP54
Fanless :  yes
Stackable :  no
OSI layer :  L3 static (L2+)
Max. operating temperature (°C) :  70
Min. operating temperature (°C) :  -40
PoE-in :  802.3af/at
PoE-out :  no
Homologation EN50155 :  no
Processor
Number of Cores :  1
Processor :  Marvell 98DX226S, 800 MHz
Display
Display :  no
Network interfaces
LAN :  yes
Gigabit LAN :  yes
Port Speed :  1 Gb/s + 10 Gb/s
Inputs and outputs
RJ-45 :  1
SFP :  5
SFP+ :  4
RS-232 port :  no
Power supply
PoE support :  yes
Power type :  external power supply
Power type :  PoE active (802.3af)
Power type :  PoE active (802.3at)
Max. Voltage (jack) (V) :  57
Max. Voltage (PoE) (V) :  57
Min. Voltage (jack) (V) :  18
Min. Voltage (PoE) (V) :  18
Input Voltage (V) :  18 - 57 (DC)
Operating system
Operating system :  RouterOS
License :  L5
Warranty
Warranty period CRN (months) :  26
Warranty period EU (months) :  26
Physical properties
Color :  white
Dimensions :  303 × 212 × 71 mm
Additional equipment and features
LED indication :  yes
Certification mark :  CE, FCC, IC
Hodnocení můžou přidávat pouze přihlášení uživatelé a ti kteří produkt zakoupili

Similar products

Scroll