Product categories

Victron SmartSolar 100/20 MPPT Solar Regulator

2 104 CZK 1 739 CZK without VAT
Common price: 2 529 CZK

To send: 9 pcs

Code: SOPGWL0275 PN: SCC110020160R Warranty: 60 months
Victron SmartSolar 100/20 MPPT Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. VE.Direct For a wired data connection to a Color Control GX, other... more
Victron SmartSolar 100/20 MPPT

Bluetooth Smart built-in
The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.

VE.Direct
For a wired data connection to a Color Control GX, other GX products, PC or other devices.

Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.

Load output
Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage (48 V model: interface with a relay). Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof.

Battery Life: intelligent battery management
When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months.
The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards, the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week.

Programmable battery charge algorithm
See the software section on our website for details.

Day/night timing and light dimming option
See the software section on our website for details.

Internal temperature sensor
Compensates absorption and float charge voltage for temperature.

Optional external battery voltage and temperature sensing via Bluetooth
A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers.

Fully discharged battery recovery function
Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function.

SPECIFICATIONS

Battery voltage: 12/24/48 V Auto Select
Rated charge current: 20 A
Nominal PV power, 12 V: 290 W
Nominal PV power, 24 V: 580 W
Nominal PV power, 48 V: 1160 W
Maximum PV open circuit voltage: 100 V
Max. PV short circuit current: 20 A
Maximum efficiency: 98 %
Weight: 0,65 kg
Dimensions: 113 x 100 x 60 mm


VictronConnect app:


VictronConnect app (Android)


VictronConnect app (iOS)


VictronConnect app (Mac)

The application can also be downloaded from the Victron Energy website:
https://www.victronenergy.com/support-and-downloads/software#victronconnect-app


Configurator:
https://www.victronenergy.com/upload/software/VE-MPPT-Calc-2_4.xlsx

Brand
Manufacturer :  VICTRON
Type specification :  Regulator
Technical specification
Maximum Power (W) :  1160
Max. operating temperature (°C) :  60
Min. operating temperature (°C) :  -30
Technology :  MPPT
Power supply
Max. output voltage (V) :  20
Rated Voltage (V) :  12/24/48
Warranty
Warranty period CRN (months) :  60
Warranty period EU (months) :  60
Physical properties
Weight (kg) :  0.65
Hodnocení můžou přidávat pouze přihlášení uživatelé a ti kteří produkt zakoupili

Similar products

Scroll