Product categories

Solarmi watter heating system 2.79kWp Mono black, 4kW Inverter

34 863 CZK 28 812 CZK without VAT
Common price: 36 397 CZK

To send: 3 pcs

Code: SOPSMI0002 PN: SMIFV-WH28 Warranty: 26 months
Xtend Solarmi SMIFV-WH28 Solar photovoltaic water heating kit/system Notice: Installation may only be carried out by a qualified company. To recommend a company, contact us at fotovoltaika@100mega.cz. The kit... more
Xtend Solarmi SMIFV-WH28

Solar photovoltaic water heating kit/system


Notice: Installation may only be carried out by a qualified company. To recommend a company, contact us at fotovoltaika@100mega.cz.


The kit contains the Czech-made MR4316AC NG controller, which optimizes the resistance of the heating coil of the boiler and the photovoltaic panels so that the energy obtained from the panels is maximized. It is connected between the solar panel and the boiler heating coil. The output voltage is AC, so the controller can also be used with a conventional boiler and heating coil for AC voltage. The input voltage can be from 60 to 430 V. Only appliances with a purely resistive character (boiler, underfloor heating, direct heater without fan, infrared heater, etc.) with an input of up to 4000 W can be connected to the output (but the maximum output current of 16 A must not be exceeded).

The controller uses a new method of active search for the optimum operating point (MPPT in case the PV panels do not have the same characteristics, rated power, their temperature changes or they are not evenly illuminated) when powering the boiler. The 6 LEDs on the front panel are used to indicate the current power supply. The controller has a second DC output to which power is automatically redirected (without any other intervention) from the panels if the boiler is disconnected at the AC output.

The controller can operate in 4 modes of operation, which are described in the following text or instructions. Using a button on the controller board, eight parameters can be stored in the processor memory: maximum output voltage, panel testing period, boiler connection testing period at the output, mode of operation, I2C address of the controller, nominal load power, heated water volume and minimum heating temperature.

Note: The controller uses pulse-width modulation, which may produce a low hum from the heating coil in the boiler that could disturb the quiet of the room in which the boiler is located.


Enquiries can be made about elements of the system from the New Green Savings Program and others.

For proper installation and operation, consult the manuals for each element of the assembly.


Kit includes:

  • 6x Solarmi Solar Panel Amerisolar Mono 465 Wp Black 144 cells (MPPT 42V)
  • 1x Solarmi DS50PVS-500/G surge arrester, 500Vdc, CE
  • 1x GWL MC4-P MC4 installation connector, crimp-on (Male + Female set)
  • 1x Solarmi MR4316AC NG MPPT inverter/controller for solar water heating, 4kW
  • 2x Solarmi PV14 16A gG 690V 14X51 cylindrical fuse
  • 1x Solarmi OPVP14-2 63A fuse disconnector for photovoltaics
  • 1x GWL SC4-1M-2C solar cable 1500V/25A, 20m (cross section 2x 4mm)

GENERAL TECHNICAL DETAILS:

Power supply voltage: from 60 to 430 V (max.)
Input current: 16 A max.
Outputs: AC (boiler only, regulates adaptation to panels) DC (inverter, charger, only transfers input voltage to output)
Minimum allowable panel voltage: adjustable from 60 to 250 V
Maximum AC output voltage: adjustable from 10 to 250 V (not to exceed maximum)
AC output frequency: 121 Hz
DC output voltage: 60 to 430 V (same as current input voltage)
Max. capacitance at DC output: 2000 µF at 160 V, 1000 µF at 300 V, 500 µF at 430 V
Panel test period: adjustable from 15 s to 34 minutes
Thermostat test period: adjustable from 15 s to 34 minutes
Power indicator: five white LEDs, range from 0 to 100%
Operating temperature range: -20 to +35 °C
Ambient humidity: 10 to 90% RH (non-condensing)
Dimensions: 190 × 140 × 50 mm
Mounting: in the cabinet with M3 posts in vertical position, free space below and above 100 mm


Answers to technical questions can be found in technical support.

Brand
Manufacturer :  Xtend Solarmi
Type specification :  Set
Warranty
Warranty period CRN (months) :  26
Warranty period EU (months) :  26
Hodnocení můžou přidávat pouze přihlášení uživatelé a ti kteří produkt zakoupili
Scroll